通用型實驗室攪拌器，配備移動無線控制器和TFT數字顯示屏。轉速范圍為0/30-2000rpm
通用型實驗室攪拌器，配備移動無線控制器和TFT數字顯示屏。轉速范圍為0/30 - 2000 rpm，通過微處理器控制技術自動調節轉速。擁有RS 232 和 USB 數據接口可連接電腦對實驗過程進行控制并記錄所有參數。扭矩變化趨勢顯示功能可用于測量粘度變化趨勢。安全回路設計可確保設備能在馬達堵轉或過載狀態下自動停止運轉?？沙掷m比對攪拌軸的實際轉速和設定轉速，并自動調節轉速偏差。這項功能可保證在實驗過程中轉速的恒定，即便是在樣品粘度發生變化的情況下。
○多語言TFT顯示屏
○可編程功能
○內置溫度測量功能
○可間歇運行
○定時功能
○可調安全回路
○鎖定功能
○無級調速
○穿透式攪拌槳
○過載保護
○短時間過載運行
○外形精巧
○*運行
○錯誤代碼顯示功能
○標配 H 67.60 溫度傳感器以及 WH 11無線控制器支架
| Deviation of speed measurement n > 300rpm: | 1±% |
| Deviation of speed measurement n < 300rpm: | 3±rpm |
| Width: | 86mm |
| Power input: | 176W |
| Time setting max.: | 6000min |
| Hollow shaft, inner diameter: | 11mm |
| Extension arm length: | 220mm |
| Extension arm diameter: | 16mm |
| Chuck range max. diameter: | 10mm |
| Chuck range min. diameter: | 0.5mm |
| Setting accuracy speed: | 1±rpm |
| Temperature measurement resolution : | 0.1K |
| Temperature measuring range max.: | +350°C |
| Accuracy of temperature measurement: | ±0.5 + tolerance PT1000 (DIN IEC 751 Class A)K |
| Limit deviation temperature sensor: | ≤ ± (0.15 + 0.002xITI)K |
| Torque max. at stirring shaft: | 60Ncm |
| Output max. at stirring shaft : | 126W |
| Nominal torque: | 0.6Nm |
| Motor rating input: | 168W |
| Voltage: | 230/115/100V |
| Motor rating output: | 131W |
| Stirring quantity max. per stirring position (H2O): | 40l |
| Viscosity max.: | 50000mPas |
| deviation of torque measurement I: | 6±Ncm |
| Speed min.: | 0/30rpm |
| communication distance (depend onbuilding) max.: | 150m |
| Depth: | 230mm |
| Height: | 267mm |
| Time setting min.: | 1min |
| Speed max.: | 2000rpm |
| Temperature display: | yes |
| Speed control: | electronic, stepless |
| Connection for ext. temperature sensor: | PT1000 |
| Reversible direction of rotation : | no |
| housing material: | alu-cast coating / thermoplastic polymer |
| Motor principle: | Brushless DC |
| Fastening on stand: | extension arm |
| Hollow shaft (push-through - when stopped): | yes |
| RS 232 interface: | yes |
| Timer: | yes |
| USB interface: | yes |
| Protection class according to DIN EN 60529: | IP 40 |
| Stirring element fastening: | chuck |
| clean room qualified: | no |
explosion proofed: | no |
| Permissible relative humidity: | 80% |
| Permissible ambient temperature max.: | 40°C |
| Frequency: | 50/60Hz |
| Permissible ON time: | * |
| Weight: | 4.7kg |
| Temperature measuring range min.: | -10°C |
| Permissible ambient temperature min.: | 5°C |
| Torque display: | yes |
| Speed display: | TFT |
| Torque measurement: | trend |
| Intermittent operation: | yes |
| Analog output: | no |
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
